İBAR MAKİNA has installed and commissioned a CBM 25 R block line in Senegal. The CBM 25 R is the pallet stacking robot version of our semi-automatic CBM 25 machine: the press, moulds and output are the same.
The robot stacks the pallets of fresh blocks leaving the press on top of each other, and a forklift takes the stack to the curing area in one go. Because no workers are needed to carry pallets one by one, a robot line runs with 7–8 fewer workers on average than the same line without it. The line was set up under a steel shed; at commissioning the machine produced hollow concrete blocks, and the customer's operators were trained in running and maintaining it. According to our product record, the CBM 25 makes 10 to 18 blocks per cycle depending on the mould, about 10,000 to 18,000 blocks a day.
Layout under the shed, a close-up of the fresh blocks and the capacity table: layout, close-up and capacity table of the CBM 25 R in Senegal.
