CBM 20-2 concrete block machine shipment to Uganda has been completed by İBAR MAKİNA. The machine, scheduled for installation in Kampala, Uganda, can produce 8 pieces of 20 cm concrete blocks or 20 interlocking pavers per cycle. Combining concrete block and paving stone production in a single model, the CBM 20-2 is used to manufacture concrete products for a range of construction and landscaping needs.
Shipment and Installation Plan for Kampala, Uganda
The completion of the CBM 20-2 Concrete Block Machine shipment to Uganda marks an important stage ahead of its installation in Kampala. Shipment and installation are consecutive processes that should be considered separately. This shipment has been completed, with Kampala designated as the planned installation location.
Preparing for installation in concrete product manufacturing requires a coordinated assessment of the machine location, material flow and operating layout. Aligning stages such as raw material preparation, moulding and post-production product handling helps ensure orderly operation. Proper planning of the production area is therefore just as important as machine selection.
İBAR MAKİNA’s overall service approach includes installation, operator training and spare parts support. These services help users become familiar with the equipment and manage daily operations correctly. For the machine to be installed in Kampala, operational preparations should also be considered alongside production requirements.
Production Features of the CBM 20-2 Concrete Block Machine
The CBM 20-2 Concrete Block Machine offers a solution for concrete block and interlocking paver manufacturing, with defined output per cycle. The original production specifications for the model shipped to Uganda are as follows:
- Concrete block production: 8 pieces of 20 cm concrete blocks per cycle.
- Interlocking paver production: 20 interlocking pavers per cycle.
- Installation location: Kampala, Uganda.
- Shipment status: Shipment to Uganda has been completed.
The number of products manufactured per cycle is one of the key figures used to assess machine capacity. However, daily production planning should not be based on this figure alone. General production conditions, including concrete mix preparation, material feeding, mould changes, product handling and operating arrangements, should also be taken into account. This allows capacity expectations to be assessed against the actual operating conditions of the facility.
Concrete block and paving stone production is based on forming and compacting the prepared concrete mix in a suitable mould. The suitability of the mix, the condition of the mould and post-production curing conditions are important for product quality. Regular inspections and correct operating practices support consistent production over the long term.
Applications of Concrete Blocks and Interlocking Pavers
Concrete blocks are concrete building elements used for walls and partitions in construction projects. The dimensions and specifications of the products should be determined according to the project’s technical requirements. The CBM 20-2’s output of 8 pieces of 20 cm concrete blocks per cycle is a relevant figure when evaluating a machine for this product category.
Interlocking pavers can be used for walkways, garden landscaping, outdoor areas and properly designed vehicle access areas. Successful installation depends not only on paver production but also on ground preparation, sub-base construction and the laying method. The ability to produce 20 interlocking pavers per cycle defines the CBM 20-2’s capacity for this product category.
Selecting the Right Machine for Your Production Needs
İBAR MAKİNA has been manufacturing concrete block and paving stone machines, moulds, concrete pipe, box culvert and manhole machines, and concrete batching plants in Çerkezköy, Tekirdağ, since 1978. The company exports to more than 30 countries. In addition to the CBM 20-2 shipped to Kampala, Uganda, other models are available to meet different production requirements.
When selecting a machine, the target product, output per cycle, production area and operating layout should be assessed together. To compare the CBM 20-2 with other models, visit the Concrete Block Machine Models page. To explore a suitable solution for your concrete block or interlocking paver production project and share your requirements with İBAR MAKİNA, you can complete the quotation request form.
